rubber ring
英 [ˈrʌbə(r) rɪŋ]
美 [ˈrʌbər rɪŋ]
网络 橡胶圈; 胶圈; 套的塑胶环; 橡皮圈; 橡胶环
双语例句
- The handhold is formed by sheathing a rubber ring or movably sheathing an iron ring onto the saw blade.
拉手由橡胶环套接锯条或由铁环活动套接锯条构成。 - The annular magnet is embedded into an inner cavity of the rubber ring, the plastic cover disk is covered at the back face of the rubber ring.
将环形磁铁嵌入橡胶圈的内腔中，再将塑料罩盘盖在橡胶圈的背面。 - Relying on the elasticity of silicone rubber ring, the blood of the body parts below the silicone rubber ring is stopped.
依靠硅橡胶环的弹力，对硅橡胶环以下的肢体部位达到止血的目的。 - The manual shows a three-inch-diameter rubber ring, but I don't have it.
使用手册上说有一个直径三寸的橡胶圈，但我的没有。 - The silicone rubber ring is pulled from the distal end to the proximal end of the body by making use of the flex and nylon belt, and the blood is driven in the process of pulling.
利用松紧带和尼龙拉带将硅橡胶环从肢体远端拉向肢体近端，在这个拉的过程中，达到驱血的目的。 - The body comprises a metal ring, a spring and a rubber ring.
主体包括金属环、弹簧和橡胶环； - Research for Detecting the Rubber Ring Defects Based on Machine Vision
基于机器视觉的密封橡胶圈缺陷检测的研究 - Conclusion The rate of stress relaxation of the rubber ring ligatures on different loads are the same.
结论结扎橡皮圈在不同负载下均存在应力松弛的景象，应力松弛率相同。 - The end face of the rubber ring which faces the oil face side and is close to the spring has an interstice with the stop ring of the friction casing.
在橡胶环上、向着油面侧且邻近弹簧的端面，与摩擦壳的阻挡环之间隔有间隙。 - The pin gear-type precision seeder is composed of a wheel body, a rubber ring, a needle wheel and an isolation plate.
本实用新型主要由轮体、胶圈、针轮、隔种板等构成。 - Fibre periphery rubber ring around the rim of an automobile wheel.
纤维周边，纤维外缘汽车轮缘外边的橡皮环。 - In order to gain access to the seat and clapper rubber ring, you must compress the spring (# 3) that surrounds the clapper shaft (# 1).
为了接近阀座和阀瓣橡胶环，必须压缩环绕阀瓣轴（1号）的弹簧（3号）。 - The exhaust quantity of the physic liquor is controlled by a spacing rubber ring at the lower end of the pump plug.
药液是由泵塞在泵体内的上下运动而被引到泵帽内再从泵帽上的喷孔排出。 - The utility model is composed of an annular magnet, a rubber ring and a plastic cover disk.
它是由环形磁铁，橡胶圈和塑料罩盘组成的。 - Vertebral ring, spring, spring seat and clasp, auxiliary seals have "O" shaped rubber ring and PTFE wedge ring, quiet ring for graphite materials ( M106K).
椎环、弹簧、弹簧座以及卡环，辅助密封圈有“O”形橡胶圈和PTFE楔形环，静环材料都为石墨（M106K）。 - The utility model relates to a vacuum sealing ring, which is a circular rubber ring.
本实用新型所涉及的真空密封圈为圆形橡胶圈。 - Push rubber ring onto the plug-in coupling.
将橡胶圈推动到插入式管接头上。 - The characteristic dimensions are: a.effective aperture of oil injection; b.depth dimension the slot on the side of the seat; c.seat diameter dimension; d.height of the rubber ring.
特性尺寸包括：a.喷油有效口径；b.阀座侧面槽深尺寸；c.阀座径尺寸；d.橡胶密封圈高度。 - The Apply of Rubber Ring in the Test Research of High-Strength Concrete Compressive Strength
防崩裂皮环在高强混凝土抗压强度实验中的应用 - Using the Common O Type Rubber Ring in Super-pressure Sealing
普通O形圈在超高压密封中的应用 - Testing and Application of Lip Section Rubber Ring
唇型胶圈的试验与应用 - A combined problem with frictional contact between a rubber ring with large deformation and linear elastic thin plate is solved by means of the substructuring technique. A study of the influence of frictional coefficient and the influence of plate thickness is presented.
本文借助于子结构技术解决了大变形橡皮环和弹性薄极具有摩擦的接触问题，研究了摩擦系数、极厚对橡皮环变形的影响。 - Based on the additional decomposition theorem of deformation gradient ( i. e. S-R theorem) and co-moving coordinate technique, a typical nonlinear mechanical problem, contact large deformation of rubber ring radially compressed, was computed by FEM.
本文基于变形梯度和分解定理（S-R定理）和拖带坐标描述法，应用有限元方法，计算了橡胶环直径方向受压接触大变形问题。 - The reasons for damaging rubber ring tube seals are analyzed in this paper beginning with the mechanism of sealing and considering the working conditions of the stern tube seals.
本文从密封机理出发，结合艉轴管密封装置工作条件，剖析橡胶环式密封装置损坏的原因，在此基础上设计研制了性能良好的简易型密封装置，并就密封圈、防蚀衬套。 - Application of Antioxidant 998-A to Spinning Rubber Ring
防老剂998-A在纺纱胶圈中的应用 - Quasi-static rigidity experiments for a metal rubber ring were completed with Э-71 type universal draw-frame in low temperature at the range of the Moon temperature, and the curve of force and displacement was obtained.
采用Э71型低温万能拉伸实验机对圆环状金属橡胶试件进行了月球温度范围内的准静态刚度实验，得出了力位移实验曲线。 - The structure and difficulties in machining multihole rubber ring sulfurization mould are analyzed. The manufacturing technology of multihole glue ring sulfurization mould and the technological-economic effects obtained are introduced.
分析了多腔胶圈硫化模的结构及加工难点，重点介绍了多腔胶圈硫化模的设计制造工艺方法及获得的技术经济效果。 - Based on the O shaped rubber ring seal design principle analysis, design a suitable for machine fish body static sealing structure, for the next phase of improved sealing effect to lay the foundation for robotic fish. ( 4) Design the sleeve shaft structure.
通过对O型橡胶圈的密封设计原理的分析，设计一种适用于机器鱼箱体静密封结构，为下阶段改进机器鱼密封效果奠定基础。（4）轴套轴结构的设计。 - The reactor with the compression-type structure is mainly composed by the base, the reaction cell plate, slide, rubber ring and screwing cap.
该反应器采用压装式结构，主要由基座、反应池板、玻片、橡胶圈和旋盖组成。 - The tube is made of aluminum alloy, double sealed with O-shape rubber ring.
探管材料选用硬质合金铝，密封采用O形橡胶密封圈进行双层密封。